Bypass Doors

Bypass Doors are doors designed to be used in closets, and slide past one another rather than fold, such as in Bifold Doors. Refer to the following diagram.

Normally only Raised Panel Doors will be used for bypass doors, but in some cases, divided lite french doors may be used, when sliding doors are wanted between rooms.

Raised Panel Doors
Flat Panel Doors
French Doors

**Note- Bypass doors should overlay slighty, therefore, 2 - 2′ (24″) wide doors should have an opening under 4 foot wide to allow for at least 1 1/2 - 2″ overlap.

ByPass Hardware

We also have available all the hardware you need to hang by-pass closet doors, heavy duty bypass track and hardware for both 1 3/8″ and 1 3/4″ doors. We also have available flush cup and pulls for these doors in a variety of finishes.

134F Heavy Duty ByPass Hardware-

For 1-3/4″ or 1 3′8″ doors to 125lbs. (200 lbs. with ball bearing hangers)
Precision extruded commercial grade .052 6063T6 aluminum track features Johnson’s line-design fascia to hide finger marks and scratches or to hold paint if desired. Patented “tricycle” hangers with 1″ [25mm] dia. wheels ride smoothly and quietly on convex shaped rails with single point contact. Hangers feature a quick disconnect clip system facilitating easy mounting or dismounting of door panels. Hangers are adjustable for height in case of settling. 1″ [25mm] high adjustable floor guide. 14 �€“ 16 gauge zinc dichromate plated steel parts. Track lengths are available up to 192″ [4877mm].

Installation Instructions (PDF Format)

138F Heavy Duty ByPass Hardware-

For 1-3/8″ doors to 125lbs. Precision extruded commercial grade .052 6063T6 aluminum track features Johnson’s line-design fascia to hide finger marks and scratches or to hold paint if desired. Patented “tricycle” hangers with 1″ [25mm] dia. wheels ride smoothly and quietly on convex shaped rails with single point contact. Hangers feature a quick disconnect clip system facilitating easy mounting or dismounting of door panels. Hangers are adjustable for height in case of settling. 1″ [25mm] high adjustable floor guide. 14 – 16 gauge zinc dichromate plated steel parts.�
Installation Instructions (PDF Format)

200 SD Heavy Duty ByPass Hardware-

For 1-3/8″ or 1 3/4″ doors 300lbs. The 200SD is one of the finest residential/commercial grade sliding door systems made. Ideal for commercial applications where quality, trouble-free operation and long life is a necessity. The heavy duty .125 6063T6 precision extruded aluminum I-beam track is made to the most precise specifications, and the four-wheeled ball-bearing hangers with removable hanger plates, are manufactured with Johnson’s lifetime warranty in mind. Steel reinforced door guides, 14 – 16 gauge zinc dichromate plated steel parts.
Installation Instructions (PDF Format)